Published at Friday, March 16th, 2018 - 14:04:55 PM. Car Wiring. By Banner Jones.
The electric car uses heavy cables for its wiring because currents could be as high as 300 amps. For this reason, the cables are clad in heavy duty lugs so that power leakage and burn out are reduced to the minimum. Again you have a 400 amp fuse on the circuit and anti corrosion material is applied on the terminals to reduce corrosion.
Once you have all of these things you’ll need to drain the old gas out of the gas tank, if it has any in it, and I’d suggest replacing the fuel lines on the car also, some times you get lucky, and the tank has a drain plug on the bottom that you can just pull out to drain the old gas from the tank, but usually you end up pulling the tank out of the car, and draining it that way, it’s better this way because you can take the tank to a shop and have them check for hole or leaks.
Any content, trademark’s, or other material that might be found on the Avtozaper website that is not Avtozaper’s property remains the copyright of its respective owner/s. In no way does Avtozaper claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Avtozaper. All Rights Reserved.